I am sure that thanks to Mikroc Deray of Aytaç , many people have had a lot of knowledge and I hope that the examples given in this article also contribute. There are also 27 projects in Mik... Read more
In today’s post, I am gonna share how to use LDR sensor in Proteus. Proteus, as we all know, is a very handy software and is used for circuit and PCB designing. It is also used for circuit a... Read more
Hello friends, today I am going to post the next lecture of Proteus Tutorial. I am receiving quite a positive response about this Proteus tutorial. In the previous post, we have seen How to... Read more
Hello friends, I hope you all are fine and enjoying. Today i am going to share my new project’s tutorial which is How to use Capacitive Touch Sensor in Proteus ISIS. It is a very interesting... Read more
Hello everyone, I hope you all are fine and having fun with your lives. Today, I am going to share a semester project which is named as Automatic Street Light Project. I have designed this p... Read more
The Proteus software has an option to interface with external modules in real-time through the COMPIM (Comport Physical Interface Module) component. Its default view is a DB9-Pin Serial Port... Read more
Modifying the view of a Relay Let’s begin with a simple component, the Relay. In this example, the shape and the orientation of the component are modified. A basic relay contains a coil and... Read more
Combination of astable multi vibrator, Integrator, Comparator gives the PWM circuit. But if the frequency of operation is to be variable, then it becomes difficult, as it is necessary to cha... Read more
Sinusoidal voltages signals are often converted to square waves using Zero-Crossing detectors. In this circuit, Op-Amp operates in the open loop comparator mode. The supply voltage can be si... Read more
To detect the arrival of a particular range of voltage(s) from the swing of an input signal, this circuit is used. Two Op-Amps in comparator mode are used in this circuit. A lower comparator... Read more
