COMPUTER POWER SUPPLY MODIFICATION 2X16 VOLT SMPS SCHEMATIC CIRCUIT DIAGRAM
The 2X16 Volt Smps switched power supply circuit, made by rearranging the PC Power Supply, is an amateur operation and is not complete.
Transformer winding without making a change on the original computer power supply by making a low cost 2 × 16 volt symmetric output I made an SMPS did not work for me for the first time I’ve been working with a symmetric output smps circuit I did the short tests did not problem I recommend you examine the circuit diagram well-modified single dc + – symmetrical dc control slightly more difficult than output
Normally modified version of the power supply circuit 30volt using the “0” end of the transformer could use 2 × 16v, but the voltage collapsed at the connection did not change the connection I tried to use the last one in an optocomputer I was able to run smoothly in this way I will continue the tests I think to use this circuit in the amplifiers 2 × I have used LM3886 2x15volt normal transformer with a lot of nice to work with 16volt let’s get the best result in the SMPS circuit
Load tests and + and – channel total 12 Amper I took a few changes with 8 Amperes per channel can be pulled whatever part of that more
2X16Volt Symmetrical output Smps circuit diagram